Sirui Treppiedi T-2205X carbonio 5 sezioni T2205X Cavalletto Treppiede Espandi

Sirui Treppiedi T-2205X carbonio 5 sezioni T2205X Cavalletto Treppiede

SIRUI

SG_000505

Nuovo

Sirui Treppiedi T-2205X carbonio 5 sezioni T2205X Cavalletto Treppiede

Maggiori dettagli

Questo prodotto non è più disponibile

€ 0

5d1de5b8636fdb6cf6263613fa12f9c6.jpg

spedizione 9€ con corriere espresso assicurato

Nessun punto fedeltà per questo prodotto.

The Sirui T-2205X 5-Section Carbon Fiber Tripod is a very lightweight, compact tripod that extends to a maximum height of 56.9" and folds down to just 14.6" for easy transport. Weighing only 2.6 lb, the T-2205X supports loads up to 26.5 lb thanks to its thick upper leg sections and forged aluminum alloy chassis. The head mounting screw is reversible, with a 1/4"-20 mount on one end and 3/8"-16 on the other.

Constructed of 8x carbon fiber, the T-2205X tripod is suitable for use with just about any head and any 35mm camera, DSLR, point & shoot, or camcorder. It's an excellent travel model due to its relatively light weight and the fact that its legs fold upward to achieve a folded length of only 14.6". That's a figure that won't necessarily grow if you attach a head – the legs extend past the height of many head models that you'll mount, so the entire package stays very compact to fit comfortably in most carry-on bags and many backpacks.

The T-2205X comes with a short center column so that you can set up extremely close to the ground for ultra-low-angle shooting. With the short center column installed, you can set the legs at their wide angle (80°) and shoot from only 5.3" from the ground.

Forged aluminum results in stronger components than the traditional casting process that's often used for tripod chassis. Forging leads to more compacted metal and enhances the integrity of metal grains so they remain consistent and continuous. This leads to a longer product life and better performance
An anodizing surface treatment, produced by an electrolytic oxidation process to increase the thickness of the natural oxide layer on the surface of metal parts, is applied to increase corrosion & wear resistance and surface hardness, and to enhance color durability
Silicone twist locks for leg stages
Anti-leg rotation system makes setup faster
Automatic leg-angle lock mechanism for speed and convenience – independently lock legs into place at three different angles
Retractable spiked feet for stable operation on looser terrain
Short center column allows the tripod to reach extremely low positions – minimum height of 5.3"
Leg warmer on one leg facilitates handling in extreme weather conditions and helps protect it
Center column hook allows you to add a ballast for a sturdier setup in windy conditions
Well-designed padded travel bag with sturdy shoulder strap for carrying
Load Capacity26.5 lb (12 kg)
Maximum Height56.9" (144.5 cm)
Maximum Height w/o Column Extended49.0" (124.5 cm)
Minimum Height5.3" (13.5 cm)
Folded LengthLegs reversed: 14.6" (37.0 cm)
Legs folded down: 17.1" (43.5 cm)
Weight2.6 lb (1.2 kg)
Material8x carbon fiber
Head Attachment Fitting1/4"-20 & 3/8"-16 (reversible mounting screw)
Leg Stages/Sections4/5
Leg Lock TypeTwist lock
Diameter (Top Leg Section)1.10" (28mm)
Independent Leg SpreadYes
Spiked/Retractable FeetYes/yes
Center BraceNo
Center Column Sections1 (also includes short center column)
Bubble LevelNo

Nessuna recensione presente